Product Overview
A travertine kitchen island is not a slab with a hole cut in it. It is a fabricated unit: a stone top, an edge build-up, cutouts for sink and services, and in most cases a support and fixing detail that has to work with the cabinet carcass beneath.
Xiamen Guanmay Stone Co., Ltd fabricates travertine island tops and natural travertine island units from beige and light grey travertine blocks sourced from select quarries in Turkey, Iran and Italy. The material is a banded calcitic stone with a naturally porous texture - the open voids that give travertine its character are filled and honed during fabrication for kitchen use.
Why travertine works as an island material:
| Property | Why it matters on an island |
|---|---|
| Warm neutral colour | Beige and light grey travertine sit between white marble and grey quartzite - it does not fight cabinetry |
| Porous, matte texture | Honed filled travertine hides fingerprints and water marks better than polished marble |
| Banded veining | Horizontal movement reads well across a long island run |
| Workability | Travertine carves and profiles easily - laminated edges, drainboard grooves and curved ends are straightforward |
| Availability | Large format travertine slab supply is stable, unlike rare marbles where slab matching blocks a project |

What we fabricate as a complete island unit:
- Island top - cut-to-size travertine slab, single piece where slab length allows
- Laminated edge build-up - 40mm or 60mm apparent thickness
- Waterfall ends - mitered, vein matched where the block permits
- Sink cutout - undermount, inset, or apron-front
- Drainboard grooves - machined into the surface
- Hob and socket cutouts - set from CAD
- Bar and seating overhang - with the support detail specified
- Base cladding panels - matching travertine for the island carcass
Technical Specifications
| Parameter | Specification |
|---|---|
| Material Type | Natural Travertine (calcitic, banded) |
| Quarry Origin | Turkey / Iran / Italy - select blocks |
| Colour Range | Beige, cream, light grey, warm grey |
| Veining | Horizontal banding, cloud movement, occasional fossil structure |
| Void Treatment | Filled - cement or resin and travertine dust, per specification |
| Density | 2,400 – 2,600 kg/m³ (verify per batch) |
| Water Absorption (ASTM C97) | 0.5 – 1.5% filled / 2.0 – 5.0% unfilled |
| Compressive Strength (ASTM C170) | 60 – 120 MPa |
| Flexural Strength (ASTM C880) | 7 – 12 MPa |
| Mohs Hardness | 3 – 4 |
| Surface Finishes | Honed, Polished, Brushed, Tumbled, Unfilled (specify) |
| Available Thickness | 20mm, 30mm - laminated edges to 40mm / 60mm |
| Slab Sizes | Up to 3000 x 1500mm - larger on request |
| Typical Island Top Sizes | 2400 x 1000mm, 2800 x 1200mm, 3000 x 1200mm |
| Edge Profiles | Eased, bullnose, half bullnose, bevel, mitred waterfall |
| Cutouts | Sink, hob, socket, drainage grooves - from CAD |
| Application | Kitchen islands, worktops, vanity tops, wall cladding, flooring |
Physical test values are issued per supplied batch. Project submittals should reference the batch test report, not generic range data.

Fabrication - Cutouts, Edges and Seam Planning
Seams. Where the island exceeds available slab length, a seam is unavoidable. We plan it at the fabrication stage, not on site. Seam location is set away from sink and hob cutouts, positioned over a base support, and cut with a 45° mitre where the design allows. Seam joints are filled with colour-matched epoxy and finished flush.
Waterfall ends. The mitred corner is cut from a single slab where possible so the banding continues around the corner. The joint runs down the vertical face, not across the top, which keeps the horizontal travertine banding intact across the working surface.
Sink cutouts. Undermount sink openings are cut and polished, with the reveal set at 3–4mm. Apron-front sinks require a cut-down front edge and a rebated support - specify the sink model before fabrication. Drainboard grooves are machined 4–6mm deep with rounded ends and drained toward the sink bowl.
Edge profiles for travertine. Eased and half bullnose edges are the most practical for a kitchen. Ogee and decorative profiles trap dirt in a working surface. For laminated edges, the edge strip is cut from the same slab as the top so banding runs continuously through the build-up.
Finishes. For kitchen islands we recommend honed filled travertine. Polished travertine shows etching from citrus, vinegar and wine within the first months of use. Honed surfaces show the same etching far less. Polished travertine island tops are specified for show kitchens, hotel apartment kitchen islands and low-use applications where the gloss is a design requirement.

Quality Control & Inspection Standards
Block selection. Blocks reviewed for banding direction, colour consistency, void size and distribution, and suitability for the required slab length.
Slab inspection. Each slab checked for length, width, thickness, flatness, fill quality, edge condition, cracks and processing marks. Slabs are photographed for client approval before fabrication.
Cut-to-size inspection. For island tops, panels and edge strips: overall dimensions, diagonal measurements, edge profile, cutout dimensions, corner condition and finish consistency.
Dry-fit and sequence. For multi-piece islands and waterfall units, components are dry-fitted at the factory before packing. Panels are numbered against the layout drawing to reduce on-site variation between adjacent pieces.
Packaging. Slabs in fumigated seaworthy bundles with plastic between pieces. Island tops and cut-to-size components in wooden crates with foam and edge protection, braced to prevent movement in transit. Third-party inspection (SGS, BV) available on request.

Island Proportions & Practical Layout
The visual quality of a stone island depends partly on its proportions.
Before fabrication, the project should establish:
| Design Point | What to Confirm |
|---|---|
| Overall Length | Available kitchen space |
| Overall Depth | Cabinet and circulation requirements |
| Counter Height | Cabinet system and user requirements |
| Seating Overhang | Stool position and support |
| Sink | Size and location |
| Cooktop | Appliance dimensions and clearance |
| Waterfall | One side or two sides |
| Corners | Square or rounded |
| Stone Layout | Vein and crystal positioning |
| Lighting | Required illuminated areas |
These decisions should be made before final cutting because functional openings can significantly change the visual balance of a natural slab.
Typical Application

Modern luxury kitchen island. Honed filled beige travertine island top, 2800 x 1200mm, with a 60mm laminated edge and a 400mm seating overhang on steel brackets.
Villa open plan kitchen. Large format travertine island paired with matching travertine floor tiles - the same block family for colour continuity across the room.
Hotel apartment kitchen island. Compact islands at 1800–2200mm with integrated sink and hob cutouts, specified in batches across multiple apartments with consistent fill and finish.
Residential stone island countertop. Single-piece travertine island tops with undermount sink and drainboard grooves
Contemporary kitchen cabinet island. Light grey honed travertine top over a painted or timber carcass, with waterfall ends in matching stone.
Upscale kitchen travertine island. Polished travertine island top for display kitchens and hospitality suites where gloss is the priority.
Minimalist stone kitchen island. Unfilled or brushed travertine top where the natural porous texture is the design intent.
Luxury residential kitchen project. Full travertine package - island top, perimeter worktops, splashback and floor tiles from one batch.

FAQ
Q: Is travertine a practical material for a kitchen island worktop?
Yes, with the right finish. Travertine is calcitic and etches on contact with acid, so specify honed filled travertine rather than polished. Seal the surface, wipe acidic spills promptly, and accept that a working kitchen will develop a patina over time.
Q: How is a travertine island top handled when the island is longer than one slab?
The seam is planned at fabrication stage. It is positioned away from sink and hob cutouts and set over a base support. The joint is mitred where the design allows, filled with colour-matched epoxy, and finished flush with the surface.
Q: Can travertine carry a large seating overhang on an island?
Unsupported overhang should stay near 150mm for 20mm travertine. For a 300mm seating overhang, specify steel brackets at 600mm centres or an engineered leg. A plywood sub-top bonded beneath the stone is standard for islands over 2000mm long.
Q: What thickness is standard for a travertine kitchen island?
20mm and 30mm are standard. Most island tops use a 20mm or 30mm slab with a laminated edge build-up to give a 40mm or 60mm apparent thickness. Thicker stone resists flexural cracking better on long spans.
Q: Does travertine need filling before it is used as an island top?
For kitchen surfaces, specify filled travertine. Voids are filled with cement or resin and travertine dust, then honed. Unfilled travertine retains open pores that trap food residue and moisture, which is not practical on a working surface.
Packaging and Loading

Certifications



Contact Us
Send your island dimensions, slab reference, shop drawing or inspiration image to discuss a custom translucent stone island.
Guanmay can support stone selection, slab layout, custom CNC fabrication, waterfall processing, inspection and export packaging for illuminated kitchen island projects.















